Reason:
- v1 CSIStorageCapacity is GA since K8s 1.24 and in csi-provisioner
3.2.0 and above.
- In K8s 1.27 v1beta1/CSIStorageCapacity has been removed, so bumping
this up will enable zfs-localpv to run on K8s 1.27 & above.
Signed-off-by: Harsh Vardhan <harsh59v@gmail.com>
Signed-off-by: Niladri Halder <niladri.halder26@gmail.com>
Set default fstype to ext4 in csi-provisioner. This will be helpful when
fsType is not mention in storageclass.
Signed-off-by: Shovan Maity <shovan.cse91@gmail.com>
Usecase: A node in the Kubernetes cluster is replaced with a new node. The
new node gets a different `kubernetes.io/hostname`. The storage devices
that were attached to the old node are re-attached to the new node.
Fix: Instead of using the default `kubenetes.io/hostname` as the node affinity
label, this commit changes to use `openebs.io/nodeid`. The ZFS LocalPV driver
will pick the value from the nodes and set the affinity.
Once the old node is removed from the cluster, the K8s scheduler will continue
to schedule applications on the old node only.
User can now modify the value of `openebs.io/nodeid` on the new node to the same
value that was available on the old node. This will make sure the pods/volumes are
scheduled to the node now.
Note: Now to migrate the PV to the other node, we have to move the disks to the other node
and remove the old node from the cluster and set the same label on the new node using
the same key, which will let k8s scheduler to schedule the pods to that node.
Other updates:
* adding faq doc
* renaming the config variable to nodename
Signed-off-by: Pawan <pawan@mayadata.io>
Co-authored-by: Akhil Mohan <akhilerm@gmail.com>
* Update docs/faq.md
Co-authored-by: Akhil Mohan <akhilerm@gmail.com>
Currently controller picks one node and the node agent keeps on trying to
create the volume on that node. There might not be enough space available
on that node to create the volume.
The controller can try on all the nodes sequentially and fail
the request if volume creation fails on all the nodes which satisfies the
topology contraints.
Signed-off-by: Pawan <pawan@mayadata.io>
Encrypted pool does not allow the volume to be pre created for the
restore purpose. Here changing the design to do the restore first
and then create the ZFSVolume object which will bind the volume
already created while doing restore.
Signed-off-by: Pawan <pawan@mayadata.io>
For ZFSPV, all the node daemonset pods can go into the terminating state at
the same time since it does not need any minimum availability of those pods.
Changing maxUnavailable to 100% so that K8s can upgrade all the daemonset
pods parallelly.
Signed-off-by: Pawan <pawan@mayadata.io>
Added a schema validation for backup and restore CR. Also validating
the server address in the backup/restore controller.
Validating the server address as :
^([0-9]+.[0-9]+.[0-9]+.[0-9]+:[0-9]+)$
which is :
<any number>.<any number>.<any number>.<any number>:<any number>
Here we are validating just the format of the IP, not validating that IP should be
correct which will be little more complex. In any case if IP is not correct,
the zfs send will fail, so no need to do complex validation to validate the
correct IP and port.
Signed-off-by: Pawan <pawan@mayadata.io>
This commit adds support for Backup and Restore controller, which will be watching for
the events. The velero plugin will create a Backup CR to create a backup
with the remote location information, the controller will send the data
to that remote location.
In the same way, the velero plugin will create a Restore CR to restore the
volume from the the remote location and the restore controller will restore
the data.
Steps to use velero plugin for ZFS-LocalPV are :
1. install velero
2. add openebs plugin
velero plugin add openebs/velero-plugin:latest
3. Create the volumesnapshot location :
for full backup :-
```yaml
apiVersion: velero.io/v1
kind: VolumeSnapshotLocation
metadata:
name: default
namespace: velero
spec:
provider: openebs.io/zfspv-blockstore
config:
bucket: velero
prefix: zfs
namespace: openebs
provider: aws
region: minio
s3ForcePathStyle: "true"
s3Url: http://minio.velero.svc:9000
```
for incremental backup :-
```yaml
apiVersion: velero.io/v1
kind: VolumeSnapshotLocation
metadata:
name: default
namespace: velero
spec:
provider: openebs.io/zfspv-blockstore
config:
bucket: velero
prefix: zfs
backup: incremental
namespace: openebs
provider: aws
region: minio
s3ForcePathStyle: "true"
s3Url: http://minio.velero.svc:9000
```
4. Create backup
velero backup create my-backup --snapshot-volumes --include-namespaces=velero-ns --volume-snapshot-locations=aws-cloud-default --storage-location=default
5. Create Schedule
velero create schedule newschedule --schedule="*/1 * * * *" --snapshot-volumes --include-namespaces=velero-ns --volume-snapshot-locations=aws-local-default --storage-location=default
6. Restore from backup
velero restore create --from-backup my-backup --restore-volumes=true --namespace-mappings velero-ns:ns1
Signed-off-by: Pawan <pawan@mayadata.io>
* feat(zfspv): mounting the root filesystem to remove the dependency on the OS
We are mounting the individual library to run the zfs
binary inside the ZFS-LocalPV daemonset. The problem with this
is each OS has different sets of libraries. We need to have different
Operator yamls for different OS versions.
Here we are mounting the root directory inside the ZFS-LocalPV daemonset Pod
which does chroot to this path and run the command. As all the libraries will
be available which are present on the host inside the Pod, so we don't need to mount each
library here and also it will work for all the Operating systems.
To be on the safe side, we are mounting the host's root directory
as Readonly filesystem.
Signed-off-by: Pawan <pawan@mayadata.io>
* adding comment for namespace
Signed-off-by: Pawan <pawan@mayadata.io>
This field was added in Kubernetes 1.16 and it informs Kubernetes about
the volume modes that are supported by the driver. The default is
"Persistent" if it is not used.
This operator yaml will not work on k8s 1.14 and 1.15, since the driver supports
those k8s version so no need to mention volumeLifecycleModes in the operator as
the default is "Persistent".
Signed-off-by: Pawan <pawan@mayadata.io>
Applications who want to share a volume can use below storageclass
to make their volumes shared by multiple pods
```yaml
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
name: openebs-zfspv
parameters:
shared: "yes"
fstype: "zfs"
poolname: "zfspv-pool"
provisioner: zfs.csi.openebs.io
```
Now the provisioned volume using this storageclass can be used by multiple pods.
Here pods have to make sure of the data consistency and have to have locking mechanism.
One thing to note here is pods will be scheduled to the node where volume is present
so that all the pods can use the same volume as they can access it locally only.
This was we can avoid the NFS overhead and can get the optimal performance also.
Also fixed the log formatting in the GRPC log.
Signed-off-by: Pawan <pawan@mayadata.io>
The controller does not check whether the volume has been created or not
and return successful. Which in turn binds the pvc to the pv.
The PVC should not bound until corresponding zfs volume has been created.
Now controller will check the ZFSVolume CR state to be "Ready" before returning
successful. The CSI will retry the CreateVolume request when it will get
a error reply and when the ZFS node agent creates the ZFS volume and sets the
ZFSVolume CR state to be "Ready", the controller will return success for the
CreateVolume Request and then PVC will be bound.
Signed-off-by: Pawan <pawan@mayadata.io>
This commit adds the support for creating a Raw Block Volume request using volumemode as block in PVC :-
```
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: block-claim
spec:
volumeMode: Block
storageClassName: zfspv-block
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 5Gi
```
The driver will create a zvol for this volume and bind mount the block device at the given path.
Signed-off-by: Pawan <pawan@mayadata.io>
This commit adds the support for use to specify custom labels to the kubernetes nodes and use them in the allowedToplogoies section of the StorageClass.
Few notes:
- This PR depends on the CSI driver's capability to support custom topology keys.
- label on the nodes should be added first and then deploy the driver to make it aware of
all the labels that node has. If labels are added after ZFS-LocalPV driver
has been deployed, a restart all the node csi driver agents is required so that the driver
can pick the labels and add them as supported topology keys.
- if storageclass is using Immediate binding mode and topology key is not mentioned
then all the nodes should be labeled using same key, that means:
- same key should be present on all nodes, nodes can have different values for those keys.
- If nodes are labeled with different keys i.e. some nodes are having different keys, then ZFSPV's default scheduler can not effictively do the volume count based scheduling. In this case the CSI provisioner will pick keys from any random node and then prepare the preferred topology list using the nodes which has those keys defined. And ZFSPV scheduler will schedule the PV among those nodes only.
Signed-off-by: Pawan <pawan@mayadata.io>
k8s is very slow in attaching the volumes when dealing with the
large number of volume attachment object.
(k8s issue https://github.com/kubernetes/kubernetes/issues/84169)
The volumeattachment is not required for ZFSPV, so avoid creation
of attachment object, also removed the csi-attacher container as
this is also not needed as it acts on volumeattachment object.
k8s is very slow in attaching the volumes when dealing with the
large number of volume attachment object :
k8s issue https://github.com/kubernetes/kubernetes/issues/84169).
Volumeattachment is a CR created just to tell the watcher of it
which is csi-attacher, that it has to call the Controller Publish/Unpublish grpc.
Which does all the tasks to attach the volumes to a node for example call to the
DigitalOcean Block Storage API service to attach a created volume to a specified node.
Since for ZFSPV, volume is already present locally, nothing needs to done in Controller
Publish/Unpublish, so it is good to remove them.
so avoiding creation of attachment object in this change, also removed the csi-attacher
container as this is also not needed as it acts on volumeattachment object.
Removed csi-cluster-driver-registrar container also as it is deprecated and not needed anymore.
We are using csidriver beta CRDs so minimum k8s version required is 1.14+.
Signed-off-by: Pawan <pawan@mayadata.io>
Validating few parameters for the ZFSVolume custom resource
- compression can be "on", "off", "lzjb", "gzip", "gzip-[1-9]", "zle" and "lz4"
- encryption can be "on", "off", "aes-128-ccm", "aes-192-ccm", "aes-256-ccm", "aes-128-gcm", "aes-192-gcm", and "aes-256-gcm"
- dedup can be "on" and "off"
- poolname can be string
- ownernodeid can be string
- thinprovision can be "yes" and "no"
- volumetype can be "DATASET" and "ZVOL"
Also added required fields needed to create ZFSVolume CR
- ownerNodeID
- poolname
- volumeType
- capacity
Signed-off-by: Pawan <pawan@mayadata.io>
We can resize the volume by updating the PVC yaml to
the desired size and apply it. The ZFS Driver will take care
of updating the quota in case of dataset. If we are using a
Zvol and have mounted it as ext4 or xfs filesystem, the driver will take
care of expanding the volume via reize2fs/xfs_growfs binaries.
For resize, storageclass that provisions the pvc must suppo
rt resize. We should have allowVolumeExpansion as true in storageclass
```yaml
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
name: openebs-zfspv
allowVolumeExpansion: true
parameters:
poolname: "zfspv-pool"
provisioner: zfs.csi.openebs.io
```
Signed-off-by: Pawan <pawan@mayadata.io>
Whenever a volume is provisioned and de-provisioned we will send a google event with mainly following details :
1. pvName (will shown as app title in google analytics)
2. size of the volume
3. event type : volume-provision, volume-deprovision
4. storage type zfs-localpv
5. replicacount as 1
6. ClientId as default namespace uuid
Apart from this, we send the event once in 24 hr, which will have some info like number of nodes, node type, kubernetes version etc.
This metric is cotrolled by OPENEBS_IO_ENABLE_ANALYTICS env. We can set it to false if we don't want to send the metrics.
Signed-off-by: Pawan <pawan@mayadata.io>
changes fix the zfs operator yaml with 1.5.0 csi-provisioner
image to support volumesnapshot as datasource type to
create clone volumes.
Signed-off-by: prateekpandey14 <prateekpandey14@gmail.com>
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
so that no two pods get scheduled on the same node. Also keeping
the default replica to 1, if HA feature is required, we can change
replica count to 2(or more).
Signed-off-by: Pawan <pawan@mayadata.io>
We can have more than one controller in the system, but only one will
be the master and others will be slave. Once master is down, one of the slave will
take over via lease mechanism and start provisioning/deprovisioning the volumes.
Signed-off-by: Pawan <pawan@mayadata.io>
to make it not pull the image all the time. Also, it needed
so that while doing integration test, it uses the local image
we just build, instead of fetching the image from the dockerhub or quay
so that we can run ci on the locally built image.
Signed-off-by: Pawan <pawan@mayadata.io>
Application can now create a storageclass to create zfs filesystem
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
name: openebs-zfspv5
allowVolumeExpansion: true
parameters:
blocksize: "4k"
fstype: "zfs"
poolname: "zfspv-pool"
provisioner: zfs.csi.openebs.io
ZFSPV was supporting ext2/3/4 and xfs filesystem only which
adds one extra filesystem layer on top of ZFS filesystem. So now
we can driectly write to the ZFS filesystem and get the optimal performance
by directly creating ZFS filesystem for storage.
Signed-off-by: Pawan <pawan@mayadata.io>
This is an initial scheduler implementation for ZFS Local PV.
* adding scheduler as a configurable option
* adding volumeWeightedScheduler as scheduling logic
The volumeWeightedScheduler will go through all the nodes as per
topology information and it will pick the node which has less
volume provisioned in the given pool.
lets say there are 2 nodes node1 and node2 with below pool configuration :-
```
node1
|
|-----> pool1
| |
| |------> pvc1
| |------> pvc2
|-----> pool2
|------> pvc3
node2
|
|-----> pool1
| |
| |------> pvc4
|-----> pool2
|------> pvc5
|------> pvc6
```
So if application is using pool1 as shown in the below storage class, then ZFS driver will schedule it on node2 as it has one volume as compared to node1 which has 2 volumes in pool1.
```yaml
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
name: openebs-zfspv
provisioner: zfs.csi.openebs.io
parameters:
blocksize: "4k"
compression: "on"
dedup: "on"
thinprovision: "yes"
poolname: "pool1"
```
So if application is using pool2 as shown in the below storage class, then ZFS driver will schedule it on node1 as it has one volume only as compared node2 which has 2 volumes in pool2.
```yaml
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
name: openebs-zfspv
provisioner: zfs.csi.openebs.io
parameters:
blocksize: "4k"
compression: "on"
dedup: "on"
thinprovision: "yes"
poolname: "pool2"
```
In case of same number of volumes on all the nodes for the given pool, it can pick any node and schedule the PV on that.
Signed-off-by: Pawan <pawan@mayadata.io>
