2019-09-12 12:32:17 +05:30
/ *
Copyright © 2019 The OpenEBS Authors
Licensed under the Apache License , Version 2.0 ( the "License" ) ;
you may not use this file except in compliance with the License .
You may obtain a copy of the License at
http : //www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing , software
distributed under the License is distributed on an "AS IS" BASIS ,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND , either express or implied .
See the License for the specific language governing permissions and
limitations under the License .
* /
package driver
import (
"fmt"
"strconv"
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
"strings"
"time"
2019-09-12 12:32:17 +05:30
2021-05-31 18:59:59 +05:30
k8sapi "github.com/openebs/lib-csi/pkg/client/k8s"
zfsapi "github.com/openebs/zfs-localpv/pkg/apis/openebs.io/zfs/v1"
clientset "github.com/openebs/zfs-localpv/pkg/generated/clientset/internalclientset"
informers "github.com/openebs/zfs-localpv/pkg/generated/informer/externalversions"
kubeinformers "k8s.io/client-go/informers"
"k8s.io/client-go/kubernetes"
"sigs.k8s.io/controller-runtime/pkg/manager/signals"
2019-09-12 12:32:17 +05:30
"github.com/container-storage-interface/spec/lib/go/csi"
2020-06-09 17:17:23 +08:00
"golang.org/x/net/context"
"google.golang.org/grpc/codes"
"google.golang.org/grpc/status"
2020-12-10 11:53:16 +05:30
k8serror "k8s.io/apimachinery/pkg/api/errors"
2021-05-31 18:59:59 +05:30
apimeta "k8s.io/apimachinery/pkg/api/meta"
"k8s.io/apimachinery/pkg/labels"
"k8s.io/client-go/tools/cache"
2020-06-29 12:18:33 +05:30
"k8s.io/klog"
2020-06-09 17:17:23 +08:00
2020-12-18 21:12:52 +05:30
errors "github.com/openebs/lib-csi/pkg/common/errors"
"github.com/openebs/lib-csi/pkg/common/helpers"
schd "github.com/openebs/lib-csi/pkg/scheduler"
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
"github.com/openebs/zfs-localpv/pkg/builder/snapbuilder"
"github.com/openebs/zfs-localpv/pkg/builder/volbuilder"
2019-09-12 12:32:17 +05:30
csipayload "github.com/openebs/zfs-localpv/pkg/response"
2020-02-26 11:31:24 +05:30
analytics "github.com/openebs/zfs-localpv/pkg/usage"
2019-11-21 19:00:15 +05:30
zfs "github.com/openebs/zfs-localpv/pkg/zfs"
2019-09-12 12:32:17 +05:30
)
2020-08-07 20:50:13 +05:30
// size constants
const (
MB = 1000 * 1000
GB = 1000 * 1000 * 1000
Mi = 1024 * 1024
Gi = 1024 * 1024 * 1024
)
2019-09-12 12:32:17 +05:30
// controller is the server implementation
// for CSI Controller
type controller struct {
driver * CSIDriver
capabilities [ ] * csi . ControllerServiceCapability
2021-05-31 18:59:59 +05:30
indexedLabel string
k8sNodeInformer cache . SharedIndexInformer
zfsNodeInformer cache . SharedIndexInformer
2019-09-12 12:32:17 +05:30
}
// NewController returns a new instance
// of CSI controller
func NewController ( d * CSIDriver ) csi . ControllerServer {
2021-05-31 18:59:59 +05:30
ctrl := & controller {
2019-09-12 12:32:17 +05:30
driver : d ,
capabilities : newControllerCapabilities ( ) ,
}
2021-05-31 18:59:59 +05:30
if err := ctrl . init ( ) ; err != nil {
klog . Fatalf ( "init controller: %v" , err )
}
return ctrl
}
func ( cs * controller ) init ( ) error {
cfg , err := k8sapi . Config ( ) . Get ( )
if err != nil {
return errors . Wrapf ( err , "failed to build kubeconfig" )
}
kubeClient , err := kubernetes . NewForConfig ( cfg )
if err != nil {
return errors . Wrap ( err , "failed to build k8s clientset" )
}
openebsClient , err := clientset . NewForConfig ( cfg )
if err != nil {
return errors . Wrap ( err , "failed to build openebs clientset" )
}
kubeInformerFactory := kubeinformers . NewSharedInformerFactory ( kubeClient , 0 )
openebsInformerfactory := informers . NewSharedInformerFactoryWithOptions ( openebsClient ,
0 , informers . WithNamespace ( zfs . OpenEBSNamespace ) )
// set up signals so we handle the first shutdown signal gracefully
stopCh := signals . SetupSignalHandler ( )
cs . k8sNodeInformer = kubeInformerFactory . Core ( ) . V1 ( ) . Nodes ( ) . Informer ( )
cs . zfsNodeInformer = openebsInformerfactory . Zfs ( ) . V1 ( ) . ZFSNodes ( ) . Informer ( )
if err = cs . zfsNodeInformer . AddIndexers ( map [ string ] cache . IndexFunc {
LabelIndexName ( cs . indexedLabel ) : LabelIndexFunc ( cs . indexedLabel ) ,
} ) ; err != nil {
return errors . Wrapf ( err , "failed to add index on label %v" , cs . indexedLabel )
}
go cs . k8sNodeInformer . Run ( stopCh )
go cs . zfsNodeInformer . Run ( stopCh )
2021-09-16 16:19:42 +05:30
if zfs . GoogleAnalyticsEnabled == "true" {
analytics . New ( ) . Build ( ) . InstallBuilder ( true ) . Send ( )
go analytics . PingCheck ( )
}
2021-05-31 18:59:59 +05:30
// wait for all the caches to be populated.
klog . Info ( "waiting for k8s & zfs node informer caches to be synced" )
cache . WaitForCacheSync ( stopCh ,
cs . k8sNodeInformer . HasSynced ,
cs . zfsNodeInformer . HasSynced )
klog . Info ( "synced k8s & zfs node informer caches" )
return nil
2019-09-12 12:32:17 +05:30
}
// SupportedVolumeCapabilityAccessModes contains the list of supported access
// modes for the volume
var SupportedVolumeCapabilityAccessModes = [ ] * csi . VolumeCapability_AccessMode {
2021-05-04 19:57:41 +05:30
{
2019-09-12 12:32:17 +05:30
Mode : csi . VolumeCapability_AccessMode_SINGLE_NODE_WRITER ,
} ,
}
2020-02-26 11:31:24 +05:30
// sendEventOrIgnore sends anonymous local-pv provision/delete events
2020-06-07 16:58:44 +05:30
func sendEventOrIgnore ( pvcName , pvName , capacity , stgType , method string ) {
2020-02-26 11:31:24 +05:30
if zfs . GoogleAnalyticsEnabled == "true" {
analytics . New ( ) . Build ( ) . ApplicationBuilder ( ) .
SetVolumeType ( stgType , method ) .
SetDocumentTitle ( pvName ) .
2020-06-07 16:58:44 +05:30
SetCampaignName ( pvcName ) .
2020-02-26 11:31:24 +05:30
SetLabel ( analytics . EventLabelCapacity ) .
SetReplicaCount ( analytics . LocalPVReplicaCount , method ) .
SetCategory ( method ) .
SetVolumeCapacity ( capacity ) . Send ( )
}
}
2020-08-07 20:50:13 +05:30
// getRoundedCapacity rounds the capacity on 1024 base
func getRoundedCapacity ( size int64 ) int64 {
/ *
* volblocksize and recordsize must be power of 2 from 512 B to 1 M
* so keeping the size in the form of Gi or Mi should be
* sufficient to make volsize multiple of volblocksize / recordsize .
* /
if size > Gi {
return ( ( size + Gi - 1 ) / Gi ) * Gi
}
// Keeping minimum allocatable size as 1Mi (1024 * 1024)
return ( ( size + Mi - 1 ) / Mi ) * Mi
}
2020-12-10 11:53:16 +05:30
func waitForVolDestroy ( volname string ) error {
2021-05-04 19:57:41 +05:30
for {
2020-12-10 11:53:16 +05:30
_ , err := zfs . GetZFSVolume ( volname )
if err != nil {
if k8serror . IsNotFound ( err ) {
return nil
}
return status . Errorf ( codes . Internal ,
"zfs: destroy wait failed, not able to get the volume %s %s" , volname , err . Error ( ) )
}
time . Sleep ( time . Second )
2021-01-13 21:46:54 +05:30
klog . Infof ( "waiting for volume to be destroyed %s" , volname )
2020-12-10 11:53:16 +05:30
}
}
2020-12-10 15:36:08 +05:30
func waitForReadySnapshot ( snapname string ) error {
2021-05-04 19:57:41 +05:30
for {
2020-12-10 15:36:08 +05:30
snap , err := zfs . GetZFSSnapshot ( snapname )
if err != nil {
return status . Errorf ( codes . Internal ,
"zfs: wait failed, not able to get the snapshot %s %s" , snapname , err . Error ( ) )
}
switch snap . Status . State {
case zfs . ZFSStatusReady :
return nil
}
time . Sleep ( time . Second )
}
}
2020-06-09 17:17:23 +08:00
// CreateZFSVolume create new zfs volume from csi volume request
2021-01-13 21:46:54 +05:30
func CreateZFSVolume ( ctx context . Context , req * csi . CreateVolumeRequest ) ( string , error ) {
2020-12-10 11:53:16 +05:30
volName := strings . ToLower ( req . GetName ( ) )
2020-08-07 20:50:13 +05:30
size := getRoundedCapacity ( req . GetCapacityRange ( ) . RequiredBytes )
2020-06-01 14:21:24 +02:00
// parameter keys may be mistyped from the CRD specification when declaring
// the storageclass, which kubectl validation will not catch. Because ZFS
// parameter keys (not values!) are all lowercase, keys may safely be forced
// to the lower case.
originalParams := req . GetParameters ( )
parameters := helpers . GetCaseInsensitiveMap ( & originalParams )
rs := parameters [ "recordsize" ]
bs := parameters [ "volblocksize" ]
compression := parameters [ "compression" ]
dedup := parameters [ "dedup" ]
encr := parameters [ "encryption" ]
kf := parameters [ "keyformat" ]
kl := parameters [ "keylocation" ]
pool := parameters [ "poolname" ]
tp := parameters [ "thinprovision" ]
schld := parameters [ "scheduler" ]
fstype := parameters [ "fstype" ]
2020-06-26 12:38:09 +05:30
shared := parameters [ "shared" ]
2019-11-21 19:00:15 +05:30
vtype := zfs . GetVolumeType ( fstype )
2019-09-12 12:32:17 +05:30
2020-12-10 11:53:16 +05:30
capacity := strconv . FormatInt ( int64 ( size ) , 10 )
if vol , err := zfs . GetZFSVolume ( volName ) ; err == nil {
if vol . DeletionTimestamp != nil {
if _ , ok := parameters [ "wait" ] ; ok {
if err := waitForVolDestroy ( volName ) ; err != nil {
return "" , err
}
}
} else {
if vol . Spec . Capacity != capacity {
return "" , status . Errorf ( codes . AlreadyExists ,
"volume %s already present" , volName )
}
2021-01-13 21:46:54 +05:30
if vol . Status . State != zfs . ZFSStatusReady {
return "" , status . Errorf ( codes . Aborted ,
"volume %s request already pending" , volName )
}
2020-12-10 11:53:16 +05:30
return vol . Spec . OwnerNodeID , nil
}
}
2020-12-04 18:00:08 +05:30
nmap , err := getNodeMap ( schld , pool )
if err != nil {
return "" , status . Errorf ( codes . Internal , "get node map failed : %s" , err . Error ( ) )
}
2021-01-13 21:46:54 +05:30
var prfList [ ] string
if node , ok := parameters [ "node" ] ; ok {
2020-12-10 11:53:16 +05:30
// (hack): CSI Sanity test does not pass topology information
2021-01-13 21:46:54 +05:30
prfList = append ( prfList , node )
} else {
// run the scheduler
prfList = schd . Scheduler ( req , nmap )
2019-11-06 21:20:49 +05:30
}
2021-01-13 21:46:54 +05:30
if len ( prfList ) == 0 {
return "" , status . Error ( codes . Internal , "scheduler failed, node list is empty for creating the PV" )
}
2019-11-01 06:46:04 +05:30
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
volObj , err := volbuilder . NewBuilder ( ) .
2019-09-12 12:32:17 +05:30
WithName ( volName ) .
2020-12-10 11:53:16 +05:30
WithCapacity ( capacity ) .
2019-11-21 19:00:15 +05:30
WithRecordSize ( rs ) .
WithVolBlockSize ( bs ) .
2019-09-12 12:32:17 +05:30
WithPoolName ( pool ) .
WithDedup ( dedup ) .
2019-10-15 22:51:48 +05:30
WithEncryption ( encr ) .
WithKeyFormat ( kf ) .
WithKeyLocation ( kl ) .
2019-09-12 12:32:17 +05:30
WithThinProv ( tp ) .
2019-11-21 19:00:15 +05:30
WithVolumeType ( vtype ) .
2020-05-18 16:30:20 +05:30
WithVolumeStatus ( zfs . ZFSStatusPending ) .
2019-11-21 19:00:15 +05:30
WithFsType ( fstype ) .
2020-06-26 12:38:09 +05:30
WithShared ( shared ) .
2019-09-12 12:32:17 +05:30
WithCompression ( compression ) . Build ( )
if err != nil {
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
return "" , status . Error ( codes . Internal , err . Error ( ) )
2019-09-12 12:32:17 +05:30
}
2021-01-13 21:46:54 +05:30
klog . Infof ( "zfs: trying volume creation %s/%s on node %s" , pool , volName , prfList )
// try volume creation sequentially on all nodes
for _ , node := range prfList {
2021-06-25 11:44:24 +05:30
var nodeid string
nodeid , err = zfs . GetNodeID ( node )
2021-05-01 19:05:01 +05:30
if err != nil {
continue
}
vol , _ := volbuilder . BuildFrom ( volObj ) . WithOwnerNodeID ( nodeid ) . WithVolumeStatus ( zfs . ZFSStatusPending ) . Build ( )
2021-01-13 21:46:54 +05:30
timeout := false
timeout , err = zfs . ProvisionVolume ( ctx , vol )
if err == nil {
return node , nil
}
// if timeout reached, return the error and let csi retry the volume creation
if timeout {
break
}
}
2019-09-12 12:32:17 +05:30
if err != nil {
2021-01-13 21:46:54 +05:30
// volume provisioning failed, delete the zfs volume resource
zfs . DeleteVolume ( volName ) // ignore error
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
}
2021-01-13 21:46:54 +05:30
return "" , status . Errorf ( codes . Internal ,
"not able to provision the volume, nodes %v, err : %s" , prfList , err . Error ( ) )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
}
2020-11-11 18:58:25 +05:30
// CreateVolClone creates the clone from a volume
2021-01-13 21:46:54 +05:30
func CreateVolClone ( ctx context . Context , req * csi . CreateVolumeRequest , srcVol string ) ( string , error ) {
2020-12-10 11:53:16 +05:30
volName := strings . ToLower ( req . GetName ( ) )
2020-11-11 18:58:25 +05:30
parameters := req . GetParameters ( )
// lower case keys, cf CreateZFSVolume()
pool := helpers . GetInsensitiveParameter ( & parameters , "poolname" )
size := getRoundedCapacity ( req . GetCapacityRange ( ) . RequiredBytes )
volsize := strconv . FormatInt ( int64 ( size ) , 10 )
vol , err := zfs . GetZFSVolume ( srcVol )
if err != nil {
return "" , status . Error ( codes . NotFound , err . Error ( ) )
}
if vol . Spec . PoolName != pool {
return "" , status . Errorf ( codes . Internal ,
"clone: different pool src pool %s dst pool %s" ,
vol . Spec . PoolName , pool )
}
if vol . Spec . Capacity != volsize {
return "" , status . Error ( codes . Internal , "clone: volume size is not matching" )
}
selected := vol . Spec . OwnerNodeID
labels := map [ string ] string { zfs . ZFSSrcVolKey : vol . Name }
// create the clone from the source volume
volObj , err := volbuilder . NewBuilder ( ) .
WithName ( volName ) .
WithVolumeStatus ( zfs . ZFSStatusPending ) .
WithLabels ( labels ) . Build ( )
2021-05-06 17:07:43 +05:30
if err != nil {
return "" , err
}
2020-11-11 18:58:25 +05:30
volObj . Spec = vol . Spec
// use the snapshot name same as new volname
volObj . Spec . SnapName = vol . Name + "@" + volName
2021-01-13 21:46:54 +05:30
_ , err = zfs . ProvisionVolume ( ctx , volObj )
2020-11-11 18:58:25 +05:30
if err != nil {
return "" , status . Errorf ( codes . Internal ,
2021-01-13 21:46:54 +05:30
"clone: not able to provision the volume err : %s" , err . Error ( ) )
2020-11-11 18:58:25 +05:30
}
return selected , nil
}
// CreateSnapClone creates the clone from a snapshot
2021-01-13 21:46:54 +05:30
func CreateSnapClone ( ctx context . Context , req * csi . CreateVolumeRequest , snapshot string ) ( string , error ) {
2020-12-10 11:53:16 +05:30
volName := strings . ToLower ( req . GetName ( ) )
2020-06-01 14:21:24 +02:00
parameters := req . GetParameters ( )
// lower case keys, cf CreateZFSVolume()
pool := helpers . GetInsensitiveParameter ( & parameters , "poolname" )
2020-08-07 20:50:13 +05:30
size := getRoundedCapacity ( req . GetCapacityRange ( ) . RequiredBytes )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
volsize := strconv . FormatInt ( int64 ( size ) , 10 )
snapshotID := strings . Split ( snapshot , "@" )
if len ( snapshotID ) != 2 {
return "" , status . Errorf (
2020-12-10 11:53:16 +05:30
codes . NotFound ,
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
"snap name is not valid %s, {%s}" ,
snapshot ,
"invalid snapshot name" ,
)
}
snap , err := zfs . GetZFSSnapshot ( snapshotID [ 1 ] )
if err != nil {
2020-12-10 11:53:16 +05:30
return "" , status . Error ( codes . NotFound , err . Error ( ) )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
}
if snap . Spec . PoolName != pool {
return "" , status . Errorf ( codes . Internal ,
"clone to a different pool src pool %s dst pool %s" ,
snap . Spec . PoolName , pool )
}
if snap . Spec . Capacity != volsize {
2020-03-10 18:47:50 +05:30
return "" , status . Error ( codes . Internal , "clone volume size is not matching" )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
}
selected := snap . Spec . OwnerNodeID
volObj , err := volbuilder . NewBuilder ( ) .
2020-05-18 16:30:20 +05:30
WithName ( volName ) .
WithVolumeStatus ( zfs . ZFSStatusPending ) .
Build ( )
2021-05-06 17:07:43 +05:30
if err != nil {
return "" , err
}
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
volObj . Spec = snap . Spec
2020-12-10 11:53:16 +05:30
volObj . Spec . SnapName = strings . ToLower ( snapshot )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
2021-01-13 21:46:54 +05:30
_ , err = zfs . ProvisionVolume ( ctx , volObj )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
if err != nil {
feat(zfspv): handling unmounted volume
There can be cases where openebs namespace has been accidently deleted (Optoro case: https://mdap.zendesk.com/agent/tickets/963), There the driver attempted to destroy the dataset which will first umount the dataset and then try to destroy it, the destroy will fail as volume is busy. Here, as mentioned in the steps to recover, we have to manually mount the dataset
```
6. The driver might have attempted to destroy the volume before going down, which sets the mount as no(this strange behavior on gke ubuntu 18.04), we have to mount the dataset, go to the each node and check if there is any unmounted volume
zfs get mounted
if there is any unmounted dataset with this option as "no", we should do the below :-
mountpath=zfs get -Hp -o value mountpoint <dataset name>
zfs set mountpoint=none
zfs set mountpoint=<mountpath>
this will set the dataset to be mounted.
```
So in this case the volume will be unmounted and still mountpoint will set to the mountpath, so if application pod is deleted later on, it will try to mount the zfs dataset, here just setting the `mountpoint` is not sufficient, as if we have unmounted the zfs dataset (via zfs destroy in this case), so we have to explicitely mount the dataset **otherwise application will start running without any persistence storage**. Here automating the manual steps performed to resolve the problem, we are checking in the code that if zfs dataset is not mounted after setting the mountpoint property, attempt to mount it.
This is not the case with the zvol as it does not attempt to unmount it, so zvols are fine.
Also NodeUnPublish operation MUST be idempotent. If this RPC failed, or the CO does not know if it failed or not, it can choose to call NudeUnPublishRequest again. So handled this and returned successful if volume is not mounted also added descriptive error messages at few places.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-04-06 20:09:07 +05:30
return "" , status . Errorf ( codes . Internal ,
2021-01-13 21:46:54 +05:30
"not able to provision the clone volume err : %s" , err . Error ( ) )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
}
return selected , nil
}
// CreateVolume provisions a volume
func ( cs * controller ) CreateVolume (
ctx context . Context ,
req * csi . CreateVolumeRequest ,
) ( * csi . CreateVolumeResponse , error ) {
var err error
var selected string
2020-12-10 11:53:16 +05:30
if err = cs . validateVolumeCreateReq ( req ) ; err != nil {
return nil , err
}
volName := strings . ToLower ( req . GetName ( ) )
2020-06-01 14:21:24 +02:00
parameters := req . GetParameters ( )
// lower case keys, cf CreateZFSVolume()
pool := helpers . GetInsensitiveParameter ( & parameters , "poolname" )
2020-12-10 11:53:16 +05:30
size := getRoundedCapacity ( req . GetCapacityRange ( ) . GetRequiredBytes ( ) )
2020-05-18 16:30:20 +05:30
contentSource := req . GetVolumeContentSource ( )
2020-06-07 16:58:44 +05:30
pvcName := helpers . GetInsensitiveParameter ( & parameters , "csi.storage.k8s.io/pvc/name" )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
if contentSource != nil && contentSource . GetSnapshot ( ) != nil {
snapshotID := contentSource . GetSnapshot ( ) . GetSnapshotId ( )
2021-01-13 21:46:54 +05:30
selected , err = CreateSnapClone ( ctx , req , snapshotID )
2020-11-11 18:58:25 +05:30
} else if contentSource != nil && contentSource . GetVolume ( ) != nil {
srcVol := contentSource . GetVolume ( ) . GetVolumeId ( )
2021-01-13 21:46:54 +05:30
selected , err = CreateVolClone ( ctx , req , srcVol )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
} else {
2021-01-13 21:46:54 +05:30
selected , err = CreateZFSVolume ( ctx , req )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
}
if err != nil {
2020-12-10 11:53:16 +05:30
return nil , err
2019-09-12 12:32:17 +05:30
}
2021-01-13 21:46:54 +05:30
klog . Infof ( "created the volume %s/%s on node %s" , pool , volName , selected )
2020-12-10 15:36:08 +05:30
2020-06-07 16:58:44 +05:30
sendEventOrIgnore ( pvcName , volName , strconv . FormatInt ( int64 ( size ) , 10 ) , "zfs-localpv" , analytics . VolumeProvision )
2020-02-26 11:31:24 +05:30
2021-05-01 19:05:01 +05:30
nodeid , err := zfs . GetNodeID ( selected )
if err != nil {
return nil , status . Errorf ( codes . Internal , "GetNodeID failed : %s" , err . Error ( ) )
}
topology := map [ string ] string { zfs . ZFSTopologyKey : nodeid }
2021-06-04 07:32:24 +05:30
cntx := map [ string ] string { zfs . PoolNameKey : pool , zfs . OpenEBSCasTypeKey : zfs . ZFSCasTypeName }
2019-11-01 06:46:04 +05:30
2019-09-12 12:32:17 +05:30
return csipayload . NewCreateVolumeResponseBuilder ( ) .
WithName ( volName ) .
WithCapacity ( size ) .
2019-11-01 06:46:04 +05:30
WithTopology ( topology ) .
2020-04-14 08:46:35 +05:30
WithContext ( cntx ) .
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
WithContentSource ( contentSource ) .
2019-09-12 12:32:17 +05:30
Build ( ) , nil
}
// DeleteVolume deletes the specified volume
func ( cs * controller ) DeleteVolume (
ctx context . Context ,
req * csi . DeleteVolumeRequest ) ( * csi . DeleteVolumeResponse , error ) {
2020-06-29 12:18:33 +05:30
klog . Infof ( "received request to delete volume {%s}" , req . VolumeId )
2019-09-12 12:32:17 +05:30
2021-01-13 21:46:54 +05:30
if err := cs . validateDeleteVolumeReq ( req ) ; err != nil {
2019-09-12 12:32:17 +05:30
return nil , err
}
2020-12-10 11:53:16 +05:30
volumeID := strings . ToLower ( req . GetVolumeId ( ) )
2019-09-12 12:32:17 +05:30
// verify if the volume has already been deleted
2019-11-21 19:00:15 +05:30
vol , err := zfs . GetVolume ( volumeID )
2019-09-12 12:32:17 +05:30
if vol != nil && vol . DeletionTimestamp != nil {
goto deleteResponse
}
2020-06-09 17:17:23 +08:00
if err != nil {
2020-12-10 11:53:16 +05:30
if k8serror . IsNotFound ( err ) {
goto deleteResponse
}
2020-06-09 17:17:23 +08:00
return nil , errors . Wrapf (
err ,
"failed to get volume for {%s}" ,
volumeID ,
)
}
2021-01-13 21:46:54 +05:30
// if volume is not ready, create volume will delete it
if vol . Status . State != zfs . ZFSStatusReady {
return nil , status . Error ( codes . Internal , "can not delete, volume creation is in progress" )
}
2019-09-12 12:32:17 +05:30
// Delete the corresponding ZV CR
2019-11-21 19:00:15 +05:30
err = zfs . DeleteVolume ( volumeID )
2019-09-12 12:32:17 +05:30
if err != nil {
return nil , errors . Wrapf (
err ,
"failed to handle delete volume request for {%s}" ,
volumeID ,
)
}
2020-02-26 11:31:24 +05:30
2020-06-07 16:58:44 +05:30
sendEventOrIgnore ( "" , volumeID , vol . Spec . Capacity , "zfs-localpv" , analytics . VolumeDeprovision )
2020-02-26 11:31:24 +05:30
2019-09-12 12:32:17 +05:30
deleteResponse :
return csipayload . NewDeleteVolumeResponseBuilder ( ) . Build ( ) , nil
}
2020-12-10 11:53:16 +05:30
func isValidVolumeCapabilities ( volCaps [ ] * csi . VolumeCapability ) bool {
hasSupport := func ( cap * csi . VolumeCapability ) bool {
for _ , c := range SupportedVolumeCapabilityAccessModes {
if c . GetMode ( ) == cap . AccessMode . GetMode ( ) {
return true
}
}
return false
}
foundAll := true
for _ , c := range volCaps {
if ! hasSupport ( c ) {
foundAll = false
}
}
return foundAll
}
2019-09-12 12:32:17 +05:30
// TODO Implementation will be taken up later
// ValidateVolumeCapabilities validates the capabilities
// required to create a new volume
// This implements csi.ControllerServer
func ( cs * controller ) ValidateVolumeCapabilities (
ctx context . Context ,
req * csi . ValidateVolumeCapabilitiesRequest ,
) ( * csi . ValidateVolumeCapabilitiesResponse , error ) {
2020-12-10 11:53:16 +05:30
volumeID := strings . ToLower ( req . GetVolumeId ( ) )
if len ( volumeID ) == 0 {
return nil , status . Error ( codes . InvalidArgument , "Volume ID not provided" )
}
volCaps := req . GetVolumeCapabilities ( )
if len ( volCaps ) == 0 {
return nil , status . Error ( codes . InvalidArgument , "Volume capabilities not provided" )
}
2019-09-12 12:32:17 +05:30
2020-12-10 11:53:16 +05:30
if _ , err := zfs . GetZFSVolume ( volumeID ) ; err != nil {
return nil , status . Errorf ( codes . NotFound , "Get volume failed err %s" , err . Error ( ) )
}
var confirmed * csi . ValidateVolumeCapabilitiesResponse_Confirmed
if isValidVolumeCapabilities ( volCaps ) {
confirmed = & csi . ValidateVolumeCapabilitiesResponse_Confirmed { VolumeCapabilities : volCaps }
}
return & csi . ValidateVolumeCapabilitiesResponse {
Confirmed : confirmed ,
} , nil
2019-09-12 12:32:17 +05:30
}
// ControllerGetCapabilities fetches controller capabilities
//
// This implements csi.ControllerServer
func ( cs * controller ) ControllerGetCapabilities (
ctx context . Context ,
req * csi . ControllerGetCapabilitiesRequest ,
) ( * csi . ControllerGetCapabilitiesResponse , error ) {
resp := & csi . ControllerGetCapabilitiesResponse {
Capabilities : cs . capabilities ,
}
return resp , nil
}
// ControllerExpandVolume resizes previously provisioned volume
//
// This implements csi.ControllerServer
func ( cs * controller ) ControllerExpandVolume (
ctx context . Context ,
req * csi . ControllerExpandVolumeRequest ,
) ( * csi . ControllerExpandVolumeResponse , error ) {
2020-12-10 11:53:16 +05:30
volumeID := strings . ToLower ( req . GetVolumeId ( ) )
if volumeID == "" {
return nil , status . Errorf (
codes . InvalidArgument ,
"ControllerExpandVolume: no volumeID provided" ,
)
}
2019-09-12 12:32:17 +05:30
2020-08-07 20:50:13 +05:30
/* round off the new size */
updatedSize := getRoundedCapacity ( req . GetCapacityRange ( ) . GetRequiredBytes ( ) )
2020-03-02 12:03:03 +05:30
2020-12-10 11:53:16 +05:30
vol , err := zfs . GetZFSVolume ( volumeID )
2020-03-02 12:03:03 +05:30
if err != nil {
return nil , status . Errorf (
codes . Internal ,
"ControllerExpandVolumeRequest: failed to get ZFSVolume in for %s, {%s}" ,
2020-12-10 11:53:16 +05:30
volumeID ,
2020-03-02 12:03:03 +05:30
err . Error ( ) ,
)
}
volsize , err := strconv . ParseInt ( vol . Spec . Capacity , 10 , 64 )
if err != nil {
return nil , status . Errorf (
codes . Internal ,
"ControllerExpandVolumeRequest: failed to parse volsize in for %s, {%s}" ,
2020-12-10 11:53:16 +05:30
volumeID ,
2020-03-02 12:03:03 +05:30
err . Error ( ) ,
)
}
/ *
* Controller expand volume must be idempotent . If a volume corresponding
* to the specified volume ID is already larger than or equal to the target
* capacity of the expansion request , the plugin should reply 0 OK .
* /
if volsize >= updatedSize {
return csipayload . NewControllerExpandVolumeResponseBuilder ( ) .
WithCapacityBytes ( volsize ) .
Build ( ) , nil
}
if err := zfs . ResizeVolume ( vol , updatedSize ) ; err != nil {
return nil , status . Errorf (
codes . Internal ,
"failed to handle ControllerExpandVolumeRequest for %s, {%s}" ,
2020-12-10 11:53:16 +05:30
volumeID ,
2020-03-02 12:03:03 +05:30
err . Error ( ) ,
)
}
return csipayload . NewControllerExpandVolumeResponseBuilder ( ) .
WithCapacityBytes ( updatedSize ) .
WithNodeExpansionRequired ( true ) .
Build ( ) , nil
2019-09-12 12:32:17 +05:30
}
2020-12-10 11:53:16 +05:30
func verifySnapshotRequest ( req * csi . CreateSnapshotRequest ) error {
snapName := strings . ToLower ( req . GetName ( ) )
volumeID := strings . ToLower ( req . GetSourceVolumeId ( ) )
if snapName == "" || volumeID == "" {
return status . Errorf (
codes . InvalidArgument ,
"CreateSnapshot error invalid request %s: %s" ,
volumeID , snapName ,
)
}
snap , err := zfs . GetZFSSnapshot ( snapName )
if err != nil {
if k8serror . IsNotFound ( err ) {
return nil
}
return status . Errorf (
codes . NotFound ,
"CreateSnapshot error snap %s %s get failed : %s" ,
snapName , volumeID , err . Error ( ) ,
)
}
if snap . Labels [ zfs . ZFSVolKey ] != volumeID {
return status . Errorf (
codes . AlreadyExists ,
"CreateSnapshot error snapshot %s already exist for different source vol %s: %s" ,
snapName , snap . Labels [ zfs . ZFSVolKey ] , volumeID ,
)
}
return nil
}
2019-09-12 12:32:17 +05:30
// CreateSnapshot creates a snapshot for given volume
//
// This implements csi.ControllerServer
func ( cs * controller ) CreateSnapshot (
ctx context . Context ,
req * csi . CreateSnapshotRequest ,
) ( * csi . CreateSnapshotResponse , error ) {
2020-12-10 11:53:16 +05:30
snapName := strings . ToLower ( req . GetName ( ) )
volumeID := strings . ToLower ( req . GetSourceVolumeId ( ) )
2019-09-12 12:32:17 +05:30
2020-12-10 11:53:16 +05:30
klog . Infof ( "CreateSnapshot volume %s@%s" , volumeID , snapName )
err := verifySnapshotRequest ( req )
if err != nil {
return nil , err
}
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
snapTimeStamp := time . Now ( ) . Unix ( )
2020-12-10 11:53:16 +05:30
state , err := zfs . GetZFSSnapshotStatus ( snapName )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
if err == nil {
return csipayload . NewCreateSnapshotResponseBuilder ( ) .
2020-12-10 11:53:16 +05:30
WithSourceVolumeID ( volumeID ) .
WithSnapshotID ( volumeID + "@" + snapName ) .
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
WithCreationTime ( snapTimeStamp , 0 ) .
WithReadyToUse ( state == zfs . ZFSStatusReady ) .
Build ( ) , nil
}
2020-12-10 11:53:16 +05:30
vol , err := zfs . GetZFSVolume ( volumeID )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
if err != nil {
return nil , status . Errorf (
2020-12-10 11:53:16 +05:30
codes . NotFound ,
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
"CreateSnapshot not able to get volume %s: %s, {%s}" ,
2020-12-10 11:53:16 +05:30
volumeID , snapName ,
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
err . Error ( ) ,
)
}
labels := map [ string ] string { zfs . ZFSVolKey : vol . Name }
snapObj , err := snapbuilder . NewBuilder ( ) .
2020-12-10 11:53:16 +05:30
WithName ( snapName ) .
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
WithLabels ( labels ) . Build ( )
if err != nil {
return nil , status . Errorf (
codes . Internal ,
"failed to create snapshotobject for %s: %s, {%s}" ,
2020-12-10 11:53:16 +05:30
volumeID , snapName ,
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
err . Error ( ) ,
)
}
snapObj . Spec = vol . Spec
snapObj . Status . State = zfs . ZFSStatusPending
if err := zfs . ProvisionSnapshot ( snapObj ) ; err != nil {
return nil , status . Errorf (
codes . Internal ,
"failed to handle CreateSnapshotRequest for %s: %s, {%s}" ,
2020-12-10 11:53:16 +05:30
volumeID , snapName ,
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
err . Error ( ) ,
)
}
2020-12-10 15:36:08 +05:30
originalParams := req . GetParameters ( )
parameters := helpers . GetCaseInsensitiveMap ( & originalParams )
if _ , ok := parameters [ "wait" ] ; ok {
if err := waitForReadySnapshot ( snapName ) ; err != nil {
return nil , err
}
}
2020-12-10 11:53:16 +05:30
state , _ = zfs . GetZFSSnapshotStatus ( snapName )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
return csipayload . NewCreateSnapshotResponseBuilder ( ) .
2020-12-10 11:53:16 +05:30
WithSourceVolumeID ( volumeID ) .
WithSnapshotID ( volumeID + "@" + snapName ) .
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
WithCreationTime ( snapTimeStamp , 0 ) .
WithReadyToUse ( state == zfs . ZFSStatusReady ) .
Build ( ) , nil
2019-09-12 12:32:17 +05:30
}
// DeleteSnapshot deletes given snapshot
//
// This implements csi.ControllerServer
func ( cs * controller ) DeleteSnapshot (
ctx context . Context ,
req * csi . DeleteSnapshotRequest ,
) ( * csi . DeleteSnapshotResponse , error ) {
2020-12-10 11:53:16 +05:30
if req . SnapshotId == "" {
return nil , status . Errorf ( codes . InvalidArgument , "DeleteSnapshot: empty snapshotID" )
}
2020-06-29 12:18:33 +05:30
klog . Infof ( "DeleteSnapshot request for %s" , req . SnapshotId )
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
// snapshodID is formed as <volname>@<snapname>
// parsing them here
snapshotID := strings . Split ( req . SnapshotId , "@" )
if len ( snapshotID ) != 2 {
2020-12-10 11:53:16 +05:30
// should succeed when an invalid snapshot id is used
return & csi . DeleteSnapshotResponse { } , nil
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
}
if err := zfs . DeleteSnapshot ( snapshotID [ 1 ] ) ; err != nil {
return nil , status . Errorf (
codes . Internal ,
"failed to handle DeleteSnapshot for %s, {%s}" ,
req . SnapshotId ,
err . Error ( ) ,
)
}
return & csi . DeleteSnapshotResponse { } , nil
2019-09-12 12:32:17 +05:30
}
// ListSnapshots lists all snapshots for the
// given volume
//
// This implements csi.ControllerServer
func ( cs * controller ) ListSnapshots (
ctx context . Context ,
req * csi . ListSnapshotsRequest ,
) ( * csi . ListSnapshotsResponse , error ) {
return nil , status . Error ( codes . Unimplemented , "" )
}
// ControllerUnpublishVolume removes a previously
// attached volume from the given node
//
// This implements csi.ControllerServer
func ( cs * controller ) ControllerUnpublishVolume (
ctx context . Context ,
req * csi . ControllerUnpublishVolumeRequest ,
) ( * csi . ControllerUnpublishVolumeResponse , error ) {
return nil , status . Error ( codes . Unimplemented , "" )
}
// ControllerPublishVolume attaches given volume
// at the specified node
//
// This implements csi.ControllerServer
func ( cs * controller ) ControllerPublishVolume (
ctx context . Context ,
req * csi . ControllerPublishVolumeRequest ,
) ( * csi . ControllerPublishVolumeResponse , error ) {
return nil , status . Error ( codes . Unimplemented , "" )
}
// GetCapacity return the capacity of the
2021-05-31 18:59:59 +05:30
// given node topology segment.
2019-09-12 12:32:17 +05:30
//
// This implements csi.ControllerServer
func ( cs * controller ) GetCapacity (
ctx context . Context ,
req * csi . GetCapacityRequest ,
) ( * csi . GetCapacityResponse , error ) {
2021-05-31 18:59:59 +05:30
var segments map [ string ] string
if topology := req . GetAccessibleTopology ( ) ; topology != nil {
segments = topology . Segments
}
nodeNames , err := cs . filterNodesByTopology ( segments )
if err != nil {
return nil , status . Error ( codes . Internal , err . Error ( ) )
}
zfsNodesCache := cs . zfsNodeInformer . GetIndexer ( )
2021-10-05 16:54:11 +02:00
2021-05-31 18:59:59 +05:30
params := req . GetParameters ( )
2021-10-05 16:54:11 +02:00
2021-05-31 18:59:59 +05:30
poolParam := helpers . GetInsensitiveParameter ( & params , "poolname" )
2021-10-05 16:54:11 +02:00
// The "poolname" parameter can either be the name of a ZFS pool
// (e.g. "zpool"), or a path to a child dataset (e.g. "zpool/k8s/localpv").
//
// We parse the "poolname" parameter so the name of the ZFS pool and the
// path to the dataset is available separately.
//
// The dataset path is not used now. It could be used later to query the
// capacity of the child dataset, which could be smaller than the capacity
// of the whole pool.
//
// This is necessary because capacity calculation currently only works with
// ZFS pool names. This is why it always returns the capacitry of the whole
// pool, even if the child dataset given as the "poolname" parameter has a
// smaller capacity than the whole pool.
poolname , _ := func ( ) ( string , string ) {
poolParamSliced := strings . SplitN ( poolParam , "/" , 2 )
if len ( poolParamSliced ) == 2 {
return poolParamSliced [ 0 ] , poolParamSliced [ 1 ]
} else {
return poolParamSliced [ 0 ] , ""
}
} ( )
2021-05-31 18:59:59 +05:30
var availableCapacity int64
for _ , nodeName := range nodeNames {
v , exists , err := zfsNodesCache . GetByKey ( zfs . OpenEBSNamespace + "/" + nodeName )
if err != nil {
klog . Warning ( "unexpected error after querying the zfsNode informer cache" )
continue
}
if ! exists {
continue
}
zfsNode := v . ( * zfsapi . ZFSNode )
// rather than summing all free capacity, we are calculating maximum
// zv size that gets fit in given pool.
// See https://github.com/kubernetes/enhancements/tree/master/keps/sig-storage/1472-storage-capacity-tracking#available-capacity-vs-maximum-volume-size &
// https://github.com/container-storage-interface/spec/issues/432 for more details
for _ , zpool := range zfsNode . Pools {
2021-10-05 16:54:11 +02:00
if zpool . Name != poolname {
2021-05-31 18:59:59 +05:30
continue
}
freeCapacity := zpool . Free . Value ( )
if availableCapacity < freeCapacity {
availableCapacity = freeCapacity
}
}
}
return & csi . GetCapacityResponse {
AvailableCapacity : availableCapacity ,
} , nil
}
func ( cs * controller ) filterNodesByTopology ( segments map [ string ] string ) ( [ ] string , error ) {
nodesCache := cs . k8sNodeInformer . GetIndexer ( )
if len ( segments ) == 0 {
return nodesCache . ListKeys ( ) , nil
}
filterNodes := func ( vs [ ] interface { } ) ( [ ] string , error ) {
var names [ ] string
selector := labels . SelectorFromSet ( segments )
for _ , v := range vs {
meta , err := apimeta . Accessor ( v )
if err != nil {
return nil , err
}
if selector . Matches ( labels . Set ( meta . GetLabels ( ) ) ) {
names = append ( names , meta . GetName ( ) )
}
}
return names , nil
}
// first see if we need to filter the informer cache by indexed label,
// so that we don't need to iterate over all the nodes for performance
// reasons in large cluster.
indexName := LabelIndexName ( cs . indexedLabel )
if _ , ok := nodesCache . GetIndexers ( ) [ indexName ] ; ! ok {
// run through all the nodes in case indexer doesn't exists.
return filterNodes ( nodesCache . List ( ) )
}
if segValue , ok := segments [ cs . indexedLabel ] ; ok {
vs , err := nodesCache . ByIndex ( indexName , segValue )
if err != nil {
return nil , errors . Wrapf ( err , "query indexed store indexName=%v indexKey=%v" ,
indexName , segValue )
}
return filterNodes ( vs )
}
return filterNodes ( nodesCache . List ( ) )
2019-09-12 12:32:17 +05:30
}
// ListVolumes lists all the volumes
//
// This implements csi.ControllerServer
func ( cs * controller ) ListVolumes (
ctx context . Context ,
req * csi . ListVolumesRequest ,
) ( * csi . ListVolumesResponse , error ) {
return nil , status . Error ( codes . Unimplemented , "" )
}
func ( cs * controller ) validateDeleteVolumeReq ( req * csi . DeleteVolumeRequest ) error {
volumeID := req . GetVolumeId ( )
if volumeID == "" {
return status . Error (
codes . InvalidArgument ,
"failed to handle delete volume request: missing volume id" ,
)
}
err := cs . validateRequest (
csi . ControllerServiceCapability_RPC_CREATE_DELETE_VOLUME ,
)
if err != nil {
return errors . Wrapf (
err ,
"failed to handle delete volume request for {%s} : validation failed" ,
volumeID ,
)
}
return nil
}
// IsSupportedVolumeCapabilityAccessMode valides the requested access mode
func IsSupportedVolumeCapabilityAccessMode (
accessMode csi . VolumeCapability_AccessMode_Mode ,
) bool {
for _ , access := range SupportedVolumeCapabilityAccessModes {
if accessMode == access . Mode {
return true
}
}
return false
}
// newControllerCapabilities returns a list
// of this controller's capabilities
func newControllerCapabilities ( ) [ ] * csi . ControllerServiceCapability {
fromType := func (
cap csi . ControllerServiceCapability_RPC_Type ,
) * csi . ControllerServiceCapability {
return & csi . ControllerServiceCapability {
Type : & csi . ControllerServiceCapability_Rpc {
Rpc : & csi . ControllerServiceCapability_RPC {
Type : cap ,
} ,
} ,
}
}
var capabilities [ ] * csi . ControllerServiceCapability
for _ , cap := range [ ] csi . ControllerServiceCapability_RPC_Type {
csi . ControllerServiceCapability_RPC_CREATE_DELETE_VOLUME ,
feat(zfspv): adding snapshot and clone support for ZFSPV (#39)
This commits support snapshot and clone commands via CSI driver. User can create snap and clone using the following steps.
Note:
- Snapshot is created via reconciliation CR
- Cloned volume will be on the same zpool where the snapshot is taken
- Cloned volume will have same properties as source volume.
-----------------------------------
Create a Snapshotclass
```
kind: VolumeSnapshotClass
apiVersion: snapshot.storage.k8s.io/v1beta1
metadata:
name: zfspv-snapclass
annotations:
snapshot.storage.kubernetes.io/is-default-class: "true"
driver: zfs.csi.openebs.io
deletionPolicy: Delete
```
Once snapshotclass is created, we can use this class to create a Snapshot
```
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: zfspv-snap
spec:
volumeSnapshotClassName: zfspv-snapclass
source:
persistentVolumeClaimName: csi-zfspv
```
```
$ kubectl get volumesnapshot
NAME AGE
zfspv-snap 7m52s
```
```
$ kubectl get volumesnapshot -o yaml
apiVersion: v1
items:
- apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
annotations:
kubectl.kubernetes.io/last-applied-configuration: |
{"apiVersion":"snapshot.storage.k8s.io/v1beta1","kind":"VolumeSnapshot","metadata":{"annotations":{},"name":"zfspv-snap","namespace":"default"},"spec":{"source":{"persistentVolumeClaimName":"csi-zfspv"},"volumeSnapshotClassName":"zfspv-snapclass"}}
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- snapshot.storage.kubernetes.io/volumesnapshot-as-source-protection
- snapshot.storage.kubernetes.io/volumesnapshot-bound-protection
generation: 1
name: zfspv-snap
namespace: default
resourceVersion: "30040"
selfLink: /apis/snapshot.storage.k8s.io/v1beta1/namespaces/default/volumesnapshots/zfspv-snap
uid: 1a5cf166-c599-4f58-9f3c-f1148be47fca
spec:
source:
persistentVolumeClaimName: csi-zfspv
volumeSnapshotClassName: zfspv-snapclass
status:
boundVolumeSnapshotContentName: snapcontent-1a5cf166-c599-4f58-9f3c-f1148be47fca
creationTime: "2020-01-30T10:31:24Z"
readyToUse: true
restoreSize: "0"
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Openebs resource for the created snapshot
```
$ kubectl get snap -n openebs -o yaml
apiVersion: v1
items:
- apiVersion: openebs.io/v1alpha1
kind: ZFSSnapshot
metadata:
creationTimestamp: "2020-01-30T10:31:24Z"
finalizers:
- zfs.openebs.io/finalizer
generation: 2
labels:
kubernetes.io/nodename: pawan-2
openebs.io/persistent-volume: pvc-18cab7c3-ec5e-4264-8507-e6f7df4c789a
name: snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
namespace: openebs
resourceVersion: "30035"
selfLink: /apis/openebs.io/v1alpha1/namespaces/openebs/zfssnapshots/snapshot-1a5cf166-c599-4f58-9f3c-f1148be47fca
uid: e29d571c-42b5-4fb7-9110-e1cfc9b96641
spec:
capacity: "4294967296"
fsType: zfs
ownerNodeID: pawan-2
poolName: zfspv-pool
status: Ready
volumeType: DATASET
kind: List
metadata:
resourceVersion: ""
selfLink: ""
```
Create a clone volume
We can provide a datasource as snapshot name to create a clone volume
```yaml
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: zfspv-clone
spec:
storageClassName: openebs-zfspv
dataSource:
name: zfspv-snap
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 4Gi
```
It will create a ZFS clone volume from the mentioned snapshot and create the PV on the same node where original volume is there.
Here, As resize is not supported yet, the clone PVC size should match the size of the snapshot.
Also, all the properties from the storageclass will not be considered for the clone case, it will take the properties from the snapshot and create the clone volume. One thing to note here is that, the storageclass in clone PVC should have the same poolname as that of the original volume as across the pool, clone is not supported.
Signed-off-by: Pawan <pawan@mayadata.io>
2020-02-13 13:31:17 +05:30
csi . ControllerServiceCapability_RPC_CREATE_DELETE_SNAPSHOT ,
csi . ControllerServiceCapability_RPC_CLONE_VOLUME ,
2020-03-02 12:03:03 +05:30
csi . ControllerServiceCapability_RPC_EXPAND_VOLUME ,
2021-05-31 18:59:59 +05:30
csi . ControllerServiceCapability_RPC_GET_CAPACITY ,
2019-09-12 12:32:17 +05:30
} {
capabilities = append ( capabilities , fromType ( cap ) )
}
return capabilities
}
// validateRequest validates if the requested service is
// supported by the driver
func ( cs * controller ) validateRequest (
c csi . ControllerServiceCapability_RPC_Type ,
) error {
for _ , cap := range cs . capabilities {
if c == cap . GetRpc ( ) . GetType ( ) {
return nil
}
}
return status . Error (
codes . InvalidArgument ,
fmt . Sprintf ( "failed to validate request: {%s} is not supported" , c ) ,
)
}
func ( cs * controller ) validateVolumeCreateReq ( req * csi . CreateVolumeRequest ) error {
err := cs . validateRequest (
csi . ControllerServiceCapability_RPC_CREATE_DELETE_VOLUME ,
)
if err != nil {
return errors . Wrapf (
err ,
"failed to handle create volume request for {%s}" ,
req . GetName ( ) ,
)
}
if req . GetName ( ) == "" {
return status . Error (
codes . InvalidArgument ,
"failed to handle create volume request: missing volume name" ,
)
}
volCapabilities := req . GetVolumeCapabilities ( )
if volCapabilities == nil {
return status . Error (
codes . InvalidArgument ,
"failed to handle create volume request: missing volume capabilities" ,
)
}
return nil
}
2021-05-31 18:59:59 +05:30
// LabelIndexName add prefix for label index.
func LabelIndexName ( label string ) string {
return "l:" + label
}
// LabelIndexFunc defines index values for given label.
func LabelIndexFunc ( label string ) cache . IndexFunc {
return func ( obj interface { } ) ( [ ] string , error ) {
meta , err := apimeta . Accessor ( obj )
if err != nil {
return nil , fmt . Errorf (
"k8s api object type (%T) doesn't implements metav1.Object interface: %v" , obj , err )
}
var vs [ ] string
if v , ok := meta . GetLabels ( ) [ label ] ; ok {
vs = append ( vs , v )
}
return vs , nil
}
}